Table of Contents
Advertisement
OPERATION
Before operating the machine, please ensure you are fully aware of the below instructions, failure
to do so, could invalidate your manufacturer's warranty. Completely unwind the electrical cable.
SWITCH ON YOUR LAWNMOWER
Before starting the machine, adjust the lawn mower to the cutting height you need. (Refer to the
1.
Lawn Mower Height Adjustment section).
Your lawn mower is equipped with a safety switch. To operate the switch, press the lock button
2.
then grasp the start lever to start running.
The power will be off when the start lever is released. To restart the mower, repeat step 2 above.
3.
SWITCH OFF YOUR LAWNMOWER
1. Release the start lever. The start lever will return to the stop position automatically.
LAWNMOWER HEIGHT ADJUSTMENT
Prior to making any height adjustment to your machine, please ensure the motor is switch off, the
blade is stationary and the electrical plug removed from the wall socket. The blade will still rotate
for a short time, after the start lever has been released.
1. The lawnmower has three cutting heights, 20mm, 40mm & 60mm.
2. To adjust the front wheels, pull the front axle on either side of the cutter deck in turn and
relocate it in the require position & height.
3. For the rear wheel cutting height adjustment, turn over the unit and locate the rear axle.
4. One end is fixed by a pressure pad and the other end beside the slot is not fixed.
5. Pull the rear wheel axle end with the spring, along the slot and lift the wheel, then relocate it in
the required position.
Advertisement
Table of Contents
