Table of Contents
Advertisement
Product setting
Setting the base station controller
I Initial screen
Power-on screen
Base Station Control
Version XXXXX
I Function setting
• Press and hold the Mode button to switch to the system setting screen.
• The operation mode can be set by Up( ) or Down( ) button, and press the Mode button to switch
to the next setting.
• When you press and hold the button for 3 seconds or do not press the Mode button for 10 seconds,
it stores the change and switches to the initial screen.
• Steps to switch the function setting screen
Start
Establishment Temp.
Setting 23.0°C
Auto Rotary Time
Setting 03 Hours
Unit ID No
Setting 01
Establishment temperature setting
• Press "Mode" button once to display the setting temperature on the LCD.
Establishment Temp.
Setting 23. 0 °C
• Press Up( ) or Down( ) button to set the desired indoor temperature.
• The establishment temperature is set by 0.1°C.
16 Air conditioner Base controller
Press 'Mode'
button once
Sensitivity Temp.
Setting 02¡
High Humidity
Setting 90% RH
EXT ¡' Temp. CLR
Setting 12.5°C
Ready-to-run screen
Stop Set Temp 23.0°C
Real Temp 20.5°C
Start S/F ON
Setting 01 S.F
Low Humidity
Setting 30% RH
AIRCON ON Delay Time
Setting 00 min
[Setting temperature]
➲ The default value is 23.0°C.
➲ The setting range of the establishment temperature
is 7.0°C~99.0°C.
Advertisement
Table of Contents
