Table of Contents
Advertisement
8.6 Settings
Open the battery compartment. You can set the DIL switches.
Lock:
°C/°F:
Buzzer:
Backlight:
Set default:
Ltd. Access:
Laserflash:
Auto Off:
Slv./Mstr.:
Time/Date:
TC-K:
Note: The thermocouple must be used only outside the Ex-area!
Factory defaults
DIL switch
8.7 Setup
8.7.1 Slave mode (passive mode/Bluetooth™)
The thermometer is constantly ‚on' in this mode and the computer searches for it. This
is advantageous when the temperature needs to be monitored continuously.
Caution: Batteries of the thermometer that is operated continuously discharge consi-
derably quickly when compared with those used intermittently.
(ON) locks the measurement button.
Toggling the display between °C and °F (the time and date format
also change).
(ON) acoustic alarm.
(ON) display light
reset to the factory defaults.
Function keys are disabled.
The laser marking starts blinking when the alarm values are exceeded.
(On) The turn-off time does not extend automatically after receiving
a command from the software (applicable only to the operation in
the master mode)
Toggles the BluetoothTM mode.
Toggles between the date and time display.
Thermocouple type
Temperature range for the K type: -30°C ... +400 °C
31
Advertisement
Table of Contents
