Low Alarm (Lower Limit); Time; Date; Offset - Ecom Instruments Ex-MX4 BT Operating Instructions Manual

8.7.5 Low alarm (lower limit)

The setting of a temperature value, which when
drops below this value should initiate an optical
(blinking green LED (A) and blinking laser) and
an acoustic warning signal. Press SETUP (N) thrice.
Change the current setting (6) using arrow keys (C).
Confirm the input with ENTER (D).

8.7.6 Time

Set the time (2) (appears in the display, in the data
memory and in the printout). Press SETUP (N) four
times. Change the setting using arrow keys (C) and
ENTER (D). Press SETUP again to confirm the
change.

8.7.7 Date

Set the date (2) (appears in the data memory and in
the printout). Press SETUP (N) five times. Change the
setting using arrow keys (C) and ENTER (D). Press
SETUP again to confirm the change.

8.7.8 Offset

This function adds or subtracts the set offset value
(± 10 °C) from every measured temperature value.
You can thus minimise (permissible) deviations in the
display of different devices or improve the accuracy
within a restricted temperature range when emissivity
has been set correctly. Press the Setup key (N) till
„Offset" appears in the display. Select the value
using arrow keys (C) and confirm with Enter (D).
The icon (1) appears in the display.
N
6
N
N
N
A
C
D
2
C
D
2
C
D
1
C
D
35