Display; Graphics Range; Selecting The Graphics Functions; Begin (Manual Range) - Ecom Instruments Ex-MX4 BT Operating Instructions Manual

8.10 Display

8.10.1 Graphics range

The graphical component (4) of the display shows
the last 10 measured values as a trend display. The
measuring range of a column (B) can be calculated
automatically by the device (Auto Range Function)
or set manually (Manual Range Function).

8.10.2 Selecting the graphics functions

Press DISPLAY (L) once. Use arrow keys (C) to
choose between Auto Range (temperature range
includes measured minimum and maximum values)
and Manual Range (refer to the section 8.10.3).

8.10.3 Begin (Manual Range)

Manual setting of the lower limit of the temperature
range to be shown graphically. Press DISPLAY (L)
till „Begin" appears in the status line. Change the
value (6) using arrow keys (C).

8.10.4 End (Manual Range)

Manual setting of the upper limit of the temperature
range to be shown graphically. Press DISPLAY (L) till
„End" appears in the status line. Change the value (6)
using arrow keys (C).
38
B
L
L
L
4
C
6
C
6
C