Setting Up Your Remote Control - Philips Magnavox REM400 User Manual

KEYS AND FUNCTIONS (continued)
Key Charts
1
Red Indicator Light
The Red Indicator Light blinks to show
that the remote control is working and
also provides feedback during program-
ming sequences.
2
Component Keys
Press TV, VCR, CBL, AUD, DSS, or CD once
to select a home entertainment compo-
nent to control.
3
DSS Directional Pad
Use the pad to move the cursor in the
program guide and menu screens.
4
MENU Key
Press MENU to access the menu of your
chosen component.
5
SELECT Key
Use SELECT to choose options from your
selected component's menu or guide.
6
GUIDE Key
Use GUIDE to display the programming
guide for your components (if applicable).
7
EXIT Key
Use EXIT to exit out of the selected com-
ponent's menu or guide.
8
POWER Key
Press POWER once to turn on or off the
selected home entertainment component.
9
VOL Keys
Use VOL + (or VOL -) to raise (or lower)
the sound volume.
0
CH Keys
Use CH + (or CH -) to select the next
higher (or lower) channel for the selected
home entertainment component.
q
MUTE Key
Press MUTE once to turn sound off or on.
w
SLEEP Key
Press SLEEP to activate your TV's internal
sleep timer.(Not available for all TVs.)

SETTING UP YOUR REMOTE CONTROL

Before using your new DSS remote control,
you will need to obtain and install new bat-
teries, as described on the next page.
e
LIGHT Key
Press LIGHT once to turn on or off the
keypad back light.
r
LAST Key
Press LAST once to recall the last channel
and to page back one screen in the
main menu.
t
L1~ L3 Keys
Use the learning keys, L1~L3, to store
and recall additional remote control
functions.
y
FC1 And FC2 Keys
User-programmable Favorite Command
Keys (see page 9 for details).
u
MCP Key
Multiple-component On/Off Key (see
page 9 for details).
i
Keypad
Use the keypad (0 ~ 9) to directly enter
in channels (for example, 09 or 31). The
keypad is also used for all programming
sequences, such as entering in your pro-
gramming codes.
o
SCAN Key
Press SCAN once to change channels every
3 seconds. Press it again to stop the scan.
p
ENTER Key
Press ENTER once after entering channel
numbers on some TV models.
a
VCR Transport Keys
Use the VCR Transport Keys to control
your VCR, as well as CD or DVD player.
Press REC twice to record a tape.
s
TV/VCR Key
Press TV/VCR once to view VCR playback
or TV through the VCR.
d
SET Key
Use SET for all programming sequences.
Then you'll also need to program the DSS
remote control with the correct code num-
bers for your specific components. See
instructions starting on page 5.
3