eLine ELI-SIP2-NVR32 Manual page 28

Figure 7-3 Add Network Disk dialog box
2. Specify the name, IP address, path, account and password, and file system of the
network disk to be added, and click OK.
3. View the status of the network disk. The Status column displays the status
(Available, Connection failed, and Unavailable) of the network disk. Only the
network disk in Available state can be used for backup.
4. Double-click the network disk to access the corresponding path list, select a backup
path, and click OK to save the setting and exit.
USB storage device
−
5. Connect a USB flash drive or mobile hard disk to the USB interface on the front
panel.
6. The NVR detects and displays the USB storage device automatically.
7. Right-click the USB flash drive and choose Popup or Format to perform the
corresponding operation.
8. Double-click the USB flash drive to access the corresponding path list, select a
backup path, and click OK to save the setting and exit.
Set backup file options.
Step 2
Record File Size: specifies the maximum size of a single backup file.

Auto-Create Sub-directory: creates a subdirectory by webcam IP address or ID.

Merging Clips: specifies whether to merge two videos with discontinuous time

segments into a file.
Select the video to be backed up.
Step 3
Method 1: Select the video to be backed up during video playback. 0 shows the video
backup control bar.
- 28 -