Table of Contents
Advertisement
No.
6
Automatic full screen
Click
enable automatic full screen in the shortcut menu. If automatic full screen is enabled,
the full screen is displayed when no operation is performed during the delay time. A
toolbar appears when you move the cursor to the bottom of the full screen. To exit the
full screen, click
.
PTZ operation
Click
items can be configured: PTZ direction, zoom, preset position, track, scanning, home
position, infrared lamp, true north, and timer.
Name
Description
Layouts, Cameras, and Alarm Info panes.
so that the corresponding file can be located during video
playback.
this button. Select an option to adjust the display of the live
video pane based on requirements.
button.
This pane plays live videos and provides the front-end
Live
parameter setting function.
Video
pane
To change a code stream manually, right-click and select a
new code stream among the ones supported by the video
device from the Stream option in the shortcut menu. Code
stream information is displayed at the bottom of the video
pane.
and choose whether to enable automatic full screen and the delay time to
in the toolbar. To enter the full screen mode manually, click
. The PTZ operation menu appears, as shown in Figure 6-2. The following
: used to play a live video.
: used to close a live video.
: used to bookmark a live video in the current channel
:
: The PTZ control menu appears when you click this
- 23 -
is displayed when you click
Advertisement
Table of Contents
