eLine ELI-SIP2-NVR32 Manual page 16

If you select the manual mode, click
auto mode, the NVR synchronizes the time of cameras automatically.
Section 2: NVR network configuration
One default IP address of the NVR is 192.168.0.121, another IP address default

is192.168.1.121 when network interface 2 is used.
Parameters such as the IP address, subnet mask, default gateway, and DNS address

can be set in basic network configuration. The network connection status and speed
are displayed in real time.
Network interface 2 of the NVR supports the camera-dedicated network function

(enabled by default).

A camera-dedicated network is a network where only webcams and the NVR exist.
After the camera-dedicated network function is enabled, the NVR does the following:
Enables the DHCP service and assigns IP addresses to webcams automatically (the

DHCP function is enabled on the webcams).
Searches for webcams in the network.

Adds the searched webcams automatically and enables 24/7-hour video recording.

Figure 5-2 shows the topology of the camera-dedicated network.
Figure 5-2 Topology of the camera-dedicated network
for time synchronization. If you select the
- 16 -