Firewire (Ieee1394) And Usb2.0 Problems - Prestigio Nobile1590W User Manual

You may be running too many applications. Try to close some applications or increase system memory for higher
performance.
The processor may have been overheated due to the system's inability to regulate its internal heat. Make sure the
computer's ventilation grills are not blocked.

Firewire (IEEE1394) and USB2.0 Problems

The USB device does not work -
Windows NT 4.0 does not support USB protocols
Check the settings in the Windows Control Panel.
Make sure you have installed the necessary device drivers.
Contact the device vendor for additional support.
The IEEE1394 port does not work -
Go to [Start > Settings > Control Panel > System > Hardware > Device Manager]. You should see an entry which reads
"Texas Instrument OHCI Compliant IEEE 1394 Host Controllers" . If it does not exist, Windows has not detected the host
controller or the device driver has not been installed properly. If there is a yellow mark or red-cross on the 1394 host
controller, it may be a device or resource conflict. Replace or update the device driver from the factory CD-ROM disk or
consult Windows manual on how to solve the resource conflict problem.
Make sure the cable is fully connected.
Make sure you have installed the necessary device drivers.
Contact the device vendor for additional support.
PRESTIGIO NOBILE 1590W
23