Table of Contents
Advertisement
3.7
Mounting the Unit
This section describes the procedure to install a Portable Power Monitor unit.
Important
This product is a sensitive device. Take caution not to let it drop when installing.
Use screws to fix the product through the provided mounting screw holes for installation
on the wall or other equipment where vibration or shock may directly affect the unit.
3.7.1 Free-stand Installation
Important
When placing the product on a desk or other elevated object, place it at a sufficient
distance from the edges or corners of the object to prevent the unit from dropping to be
damaged. Caution must also be taken in laying the power supply cable and the dedicated
CT to avoid their contacting or hitting the unit.
3.7.2 Securing with Mounting Magnets
Two mounting magnets are provided on the rear side of the unit. Use them to securely
mount the unit on the wall or other vertical surface.
Important
Mount the unit on a location where mechanical shock is not applied when mounting it with
magnets.
The cable layout also requires caution not to allow the sensor head and cable apply
pressure to the magnet-mounted unit.
Mounting Magnets
3-23
3. Check and Preparation
Advertisement
Table of Contents
