Table of Contents
Advertisement
outputting the data to it at a press of button.)
*5: Continues the recording of the latest measured values until the internal memory reaches its
capacity. (If the internal memory capacity exceeds the capacity, data is overwritten from the
oldest one in the memory.)
*6: Output when the integrated power upper limit specified in THR mode is exceeded. An alarm
output is not available in SLEEP mode.
*7: An OMRON HMC-SD291 SD Memory Card or an SDHC Class 4 or higher memory card is
recommended.
*8: Nickel-metal hydride cells or alkaline dry cells can be used. Manganese battery cells cannot
be used.
*9: Battery life varies depending on the measurement environment, recording interval, operation
mode as well as the battery type and performance.
*10: Conditions: Two AAA nickel-metal hydride cells; Sleep mode; Continue mode; Recording
interval: 1 s; SD memory card: HMC-SD291; and Operation temperature: 23℃; and Automatic
range selection off.
*11: The installation place must be free from physical shock when using mounting magnets.
*12: Already installed on the product by factory default.
*13: OMRON's XW4B-02B1-H1 connector.
6-2
6. Ratings and Performance
Advertisement
Table of Contents
