Pairing With Nfc; Multipoint Connection - Phiaton BT 100 NC Owner's Manual

※ The device will not operate properly if the profiles are not supported equally. Even when the profiles
are supported equally, some features may not properly operate depending on the 'Bluetooth Device'
specifications. To check the detail specifications of this earphone's profile, refer to
'18. SPECIFICATIONS'. For any other inquiries, please contact Phiaton Customer Service.

7. PAIRING WITH NFC

1) You can easily pair the BT 100 NC with a 'Bluetooth Device'
that has NFC capability.
2) Pairing with NFC
- Activate NFC function on your 'Bluetooth Device'.
- Contact the right front side of the BT 100 NC to the section
of 'Bluetooth Device' where the 'NFC Antenna' is located.
(When you open the BT 100 NC retail package, there is a label
indicating 'NFC Antenna' location on the right front side.)
- When the 'Bluetooth Device' asks "Yes" or "No" to connect,
click "Yes".
* For the 'NFC Antenna' location of 'Bluetooth Device', refer
to the device manual or contact the device manufacturer.

8. MULTIPOINT CONNECTION

1) What is 'Multipoint Connection'?
This is a feature where BT 100 NC's user can simultaneously connect two Bluetooth devices.
2) Multipoint Connecting
- Turn on the Bluetooth feature within the two 'Bluetooth Devices' you want to connect with
BT 100 NC.
- Refer to '6. PAIRING WITH A 'BLUETOOTH DEVICE' to pair the first device with the BT 100 NC.
- Press and hold the PLAY Button again for 2.5 seconds to enter 'Pairing Mode'.
(Here, the first device becomes disconnected.)
- Once 'Pairing Mode' has been entered, pair the second device.
- Within the first 'Bluetooth Device' you want to connect, select 'BT 100 NC' again.
- Now, both of the 'Bluetooth Devices' will be connected simultaneously, and now the
'BT 100 NC' will control the secondly paired device.
※ Sleep Mode will be entered when devices are not connected within two minutes. When trying to
connect a device while in Sleep Mode, pressing any button will re-enter 'Connection Waiting Mode'
where connection is possible.
※ When the BT 100 NC power is turned off and back on, only the second paired device will
automatically be connected. When the first paired device is reconnected, then both of the devices
will remain connected.
2
1
* NFC Pairing
2
1
2
1
6