- Please follow the directions, and read the guidelines carefully before use. Please keep the owner’s guide for future reference. - Some functions of the BT 150 NC may not be available when it is paired with certain devices. - The specifications are subject to change without prior notice for quality improvement.
※ Use the BT 150 NC only for its intended purposes. ※ This device cannot be used for purposes related to human safety as it may cause radio interference during operation.
2. COMPONENTS & FEATURES 1) COMPONENTS - BT 150 NC - USB Charging Cable - Audio Cable (1.0 m, micro USB Plug to 3.5 mm Plug) - 4 Sizes of Silicon Ear Tips (S, M, L, XL) - Quick Guide...
The device may not be charged upon purchase and must first be charged before use. 1) Open the USB cover on BT 150 NC and connect the provided USB charging cable. 2) Connect the provided USB charging cable with a computer (laptop) or you may also use a separately purchased USB adapter (rating: 5V/over 500mA) to begin charging.
※ Pairing mode will start once the power is turned on for the first time after purchase. ※ When the BT 150 NC is not in use, ensure the NC function is switched OFF. If left in the ON position, this will cause the battery to run out.
Page 7
- When having entered ‘Connection Waiting Mode’ during connection. - Press the CALL/POWER Button or the PLAY Button on the earphone to connect. - The BT 150 NC will also be connected if you select ‘BT 150 NC’ from the device search list within your ‘Bluetooth Device’.
Sleep Mode, pressing any button will re-enter ‘Connection Waiting Mode’ where connection is possible. ※ When the BT 150 NC power is turned off and back on, only the second paired device will automatically be connected. When the first paired device is reconnected, then both of the devices will remain connected.
9. MONITOR FEATURE 1) The monitor feature allows you to mute your music and noise cancelling Right Side (while wearing BT 150 NC) temporarily, so you can hear the surrounding sounds without removing the ear buds.
- Both sides of the neckband feature a touch panel to control the volume and music tracks. - Sweep the touch panel to control the volume of the Left side (while wearing BT 150 NC) to top (+) / bottom (-) to control the volume.
(If you are listening to music when the call comes in, your music will be paused when you press the CALL/POWER BUTTON.) - Adjusting Call Volume: to control the call volume, sweep the touch panel of the left side (while wearing BT 150 NC) to top (+) / bottom Bluetooth Power (-) ward.
12. CHANGING SOUND MODE 1) When the BT 150 NC connects with a ‘Qualcomm® aptX™ audio’ high quality sound compatible ‘Bluetooth Device’, it connects in ‘Qualcomm® aptX™ audio’ mode automatically. (If the ‘Bluetooth Device’ cannot support ‘Qualcomm® aptX™ audio’ mode, it will be connected with SBC mode.)
15. CONNECTING AND USING THE AUDIO CABLE Left Side (while wearing BT 150 NC) 1) BT 150 NC can also be used with the audio cable connected as shown in the figure. * When connected to a device with the provided audio cable, the Bluetooth remote features are disabled and you must use the device you are connected to answer calls and play music.
16. SPECIFICATIONS 1) Main Body - Communication Network: Bluetooth 4.2 - Output Power: Power Class 2 - Max. Communication Range: Discoverable within 10 m / 33 ft. - Full Charging Time: 2 Hours - Call Time (NC ON / OFF): 6 Hours / 10.5 Hours - Music Play Time (NC ON / OFF): 6 Hours / 10.5 Hours - Standby Time (NC ON / OFF): 16 Hours / 350 Hours - Bluetooth Profile Support: HFP v1.6 / HSP v1.2 / A2DP v1.3 / AVRCP v1.5...
17. PRODUCT SYMPTOMS AND TROUBLESHOOTING 1) The power does not turn on: - Charge the device. If the power does not turn on even after charging, contact Phiaton Customer Service. 2) The device does not charge: - Check whether the USB charging cable has been properly connected with the device.
CAUTION TO USER: Changes or modifications not expressly approved by the party reasonable for compli- ance could void the user’s authority to operate the equipment. 19. CE COMPLIANCE INFORMATION Phiaton, hereby declares that this BT 150 NC is in compliance with the essential requirements and other relevant provisions of directive 1999/5/EC.