Opticon ESL Server Manual page 55

Opticon ESL
ESL Server manual
v1.0.62.2
number of ESLs are linked compared to using CSV only.
To make such a configuration, start by configuring the ESL server with a standard CSV
configuration as described in chapter 7.1.
When done, go to the 'Settings'-tab and change the 'database format' for logging to the desired
SQL database format as shown below.
After that, go back to the 'Data'-tab and temporarily change the 'Database format' to the desired
SQL format as shown below.
Configure all SQL options as described in the previous chapter, but clear the product and link
table fields.
When done, the SQL table configuration should look like this:
To test the SQL configuration, press the 'Test' button. If the connection is OK, then press 'Apply'
to save the SQL configuration.
55