How To Configure Hierarchical Color-Aware Policing; Configuring The Hierarchical Color-Aware Policing Feature - Cisco ASR 920 Series Configuration Manual

How to Configure Hierarchical Color-Aware Policing

How to Configure Hierarchical Color-Aware Policing

Configuring the Hierarchical Color-Aware Policing Feature

SUMMARY STEPS
1. enable
2. configure terminal
3. policy-map policy-map-name
4. class {class-name | class-default}
5. conform-color class-map-name [exceed-color class-map-name]
6. police [cir cir] [bc conform-burst] [pir pir] [be peak-burst] [conform-action action [exceed-action
action [violate-action action]]] [conform-color hipri-conform] [exceed-color lipri-exceed]
7. service-policy policy-map-name
8. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2 configure terminal
Example:
Router# configure terminal
Step 3
policy-map policy-map-name
Example:
Router(config)# policy-map
child-policy
Step 4 class {class-name | class-default}
Example:
Router(config-pmap)# class
user1-acl-child
QoS: Policing and Shaping Configuration Guide (Cisco ASR 920 Series)
56
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Enters policy-map configuration mode and creates a policy map.
Enters policy-map class configuration mode.
Specifies the name of the class whose policy you want to create or change or
specifies the default class (commonly known as the class-default class) before
you configure its policy. Repeat this command as many times as necessary to
specify the child or parent classes that you are creating or modifying:
Hierarchical Color-Aware Policing