Installing The Fq-100 - High End Systems FQ-100 User Manual

Installing the FQ-100

This product is constructed with a low-maintenance, corrosion-resistant
vaporizing chamber and dual carrying handles. A safety cable mounting point
can be used in securing the unit when strapped to a truss.
Caution!
Do not use the handles as a safety cable mounting point.
Before installing and operating this product, read and observe the following
warnings and cautions. Pay attention to all warning labels and instructions
printed on the exterior of your FQ-100 Fog Machine.
WARNING! Risk of electric shock.
Disconnect the unit from the electric supply before
removing the cover. Keep this device dry.
For inside use only. Not designed for outside use. For the
110V models, use 3-prong grounded electrical outlet only.
Prior to use take care to determine that the unit is installed
at the rated voltage.
WARNING! Danger of burns
Never leave the unit running unattended.
Never aim the output nozzle directly at people.
Fog machine output is very hot. Avoid coming within 60 cm
of the output nozzle during operation.
Locate the fog machine in a well-ventilated area. Never
cover the unit's vents. In order to guarantee adequate
ventilation, allow a free air space of at least 20 cm around
the sides and top of the unit.
Never aim the output nozzle at open flames.
The output nozzle becomes very hot during operation
(300°C). Keep flammable materials at least 50 cm away
from the nozzle.
Always allow the FQ-100 Fog Generator to cool down
before attempting to clean or service it.
WARNING! Danger of explosion
Never add flammable liquids of any kind (oil, gas, perfume)
to the fog liquid.
FQ-100 Fog Generator User Manual
5