Led Status P6; Initial Set Up P6 - BulletHD BIKER MATE User Manual

LED Status
Status Table Lens Module
LED (Top)
LED Colour RED
Power ON ON
Power OFF ON
Taking Video Flashing
Stop Video ON
Standby
Card Slot Fast
Empty Flashing
MicroSD Fast
Card Full Flashing
Battery Charing ON
Low Battery ON
REMARKS:
When connected to Power Converter, the RED charging LED is ON in
all modes except when the internal built-in Li-Po battery is fully charged.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!
Initial Set Up
1. Please ensure the BIKER MATE is OFF before insert or take
out the Micro SD card!
2. Open the Micro SD card slot cover.
3. Install a micro SD memory card (max up to 64GB(FAT32))
into the card slot with contacts facing upwards.
4. If no micro SD memory card is inserted in the BIKER MATE,
the Status Indicator LED will blink red and blue and camera
will shut OFF after 30 seconds.
Camera Module
Charging Indicator
LED (Back)
RED BLUE
OFF Flashing
OFF Flashing
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON ON
6
Camera Module Status
Indicator LED x 2 (Top)
RED(1080P) BLUE(720P)
Flashing OFF
ON OFF
Slowly Slowly
brighten, brighten,
then slowly then slowly
turn dark turn dark
ON OFF
Flashing Flashing
Fast
Flashing
Flashing
ON OFF
ON OFF
Buzzer
BEEP
3 Times
6 Times
1 Time
2 Times
2 Seconds
Long Beep
4 Times
OFF
OFF