BulletHD BIKER MATE User Manual

Video camera system riding video cam

Advertisement

Quick Links

Copy
WARRANTY CARD
Welcome
Thanks for purchasing BulletHD BIKER MATE
Please read this instruction manual to ensure correct use of the product prior to use.
Please keep this instruction manual in a safe place.
Please ensure that the sales store fills out the warranty with the date of purchase
and the name of the store.
The warranty does not cover any damage that may occur during any activity. It is
the user's responsibility to secure the action cam securely to any equipment.

Advertisement

Table of Contents
loading

Summary of Contents for BulletHD BIKER MATE

  • Page 1 Copy WARRANTY CARD Welcome • Thanks for purchasing BulletHD BIKER MATE • Please read this instruction manual to ensure correct use of the product prior to use. • Please keep this instruction manual in a safe place. • Please ensure that the sales store fills out the warranty with the date of purchase and the name of the store.
  • Page 2: Table Of Contents

    Contents WHAT’S INCLUDED BIKER MATE OVERVIEW LED Status Initial Set Up Charging The Battery Engine Start Mode Power ON/OFF By Pressing Button Card Slot Empty Card Slot Full Basic Settings Via SETTINGS.TXT File Storage Chart Take a Video (Manual) Loop Recording...
  • Page 3: What's Included P3

    WHAT’S INCLUDED 1. Main Controller 2. Main Controller Flat Mount 3. 3M VHB Adhesive Type-A (Pre-Fixed) 4. Sensor Data Cable 78 Inch (2 Meter) 5. Interchangeable Lens Module 6. 360 Lens Flat Mount 7. 3M VHB Adhesive Type-B (Pre-Fixed) 8. Dual USB Power Converter (DC 12V to DC 5V) 9.
  • Page 4: Biker Mate Overview P4

    BIKER MATE OVERVIEW USB Port Charging Indicator LED USB Cable Recording Button Status Indicator LED Sensor Data Cable Power ON/OFF Button Sensor Data Cable Port Micro SD Card Slot 720P/1080P Mode Button...
  • Page 5 Recording Indicator LED Sensor Data Cable Sensor Data Cable Port Optical Lens Notice: ① and ② Please make sure the cable is plugged into Power Cable(12V INPUT) correct position as the marking on top of the cable. Waterproof Fuse Box Power Indicator LED USB Power Output #1 USB Power Output #2...
  • Page 6: Led Status P6

    3. Install a micro SD memory card (max up to 64GB(FAT32)) into the card slot with contacts facing upwards. 4. If no micro SD memory card is inserted in the BIKER MATE, the Status Indicator LED will blink red and blue and camera...
  • Page 7: Charging The Battery P7

    5. When using a micro SD memory card, there should be no DATA from other devices on the card. If you are using a micro SD memory card for the first time in the BIKER MATE, you should first format (FAT32) the card in your computer.
  • Page 8: Power On/Off By Pressing Button P8

    Power ON/OFF By Pressing Button Turn ON the BIKER camera by pressing the Power button once. The BIKER MATE will beep 3 times,Blue Turn LED will flash on Charging Indicator and Red LEDs on BIKER MATE Status and Lens Module will be steady ON. A single beep will indicate Recording with Red LED flashing on Lens Module and slowly blinking on Status Indicator.
  • Page 9: Basic Settings Via Settings.txt File P9

    Basic Settings Via SETTINGS.TXT File You can also change the settings via the SETTINGS.TXT file, the file will be created automatically on the micro SD card after the camera is turned ON. You can even type your Name on the screen of video. For example: BIKER-MATE To prevent serious system crash, only English alpha-numeric can be used for below parameters...
  • Page 10: Take A Video (Manual) P10

    270 mins 530 mins Take a Video (Manual) Turn ON the BIKER MATE by pressing the Power button. The Camera beeps 3 times with lens/status twin LEDs flashing Red and the Charger LED flashing Blue. At the fourth beep, the camera automatically starts recording slow blinking twin status LEDs Red and flashing Lens LED Red.
  • Page 11: Playback On Your Computer P11

    Settings menu. Playback On Your Computer Power OFF the BIKER MATE! Connect with your computer via USB cable from the USB port. The camera will switch ON and recognized automatically as USB Device. Or you can take out the micro SD card and use your own card reader to connect with your computer too.
  • Page 12: On A Mac P12

    OFF. On a MAC Simply plug the BIKER camera into your MAC via USB cable, turn ON the BIKER MATE, and the MAC OS will recognize the BIKER MATE as an external hard drive. Important Tip For MAC Users...
  • Page 13: Technical Specifications P13

    Technical Specifications Optics: • FISHEYE view @1080p (default) Mode • Ultra Wide Angle view @720p Mode • Lens aperture f/1.8, fixed focus glass lens • Optical lens: ø18mm FISHEYE Lens • Lens Construction: 6 Elements • Angle of view: 160° (diagonal) Video: •...
  • Page 14 It is the users responsibility to secure the BulletHD securely to any sport equipment. WARNING: The form and functions of BULLETHD, accessories, logos, and all graphics are the patented, protected property of Silver Creation International Ltd. Any attempt by anyone other than our authorized dealers to copy or reproduce any of the above without permission of Silver Creation Int’l Ltd.
  • Page 15 Shoot and share video at www.BulletHD.us V2.0 BulletHD BIKER MATE UM English Technical changes and mistakes reserved! Due to rapid technical development, products are under constant changes / improvements - please check www.BulletHD.us for current updates.

Table of Contents