Page 1
Welcome • Thanks for purchasing this Bullet HD PRO1080P • Please read this instruction manual to ensure correct use of the product prior to use. • Please keep this instruction manual in a safe place. • Please ensure that the sales store fills out the warranty with the date of purchase and the name of the store.
Table of Contents What’s in the box Camcorder Overview Initial Set Up Charging the battery Date & Time Setting MicroSD card Storage Chart Take a Video Take Snapshot Photos Playback on your computer On a Mac Webcam Driver Installation Firmware Installation LED Status Table Repairs Technical Specification...
Page 3
Use this cap to better sound quality. Not for water sports! Bullet HD Mount Adapter This mount holds the BulletHD in place and with a 360 degree rotation. This mount is compatible with the strap mount and universal mount. Universal Mount 3 pcs It has a “female”...
Page 4
Strap Mount for Non-vented Helmet / Goggles 3 pcs Goggles Strap with width below 40mm is compatible! Just slide your goggles strap into this mount and you are ready to go. You can use this mount for non-vented helmet too! Surf Expansion Allows quick-release or quickly attached your Bullet HD on to a surfboard.
Page 5
Hand Safety Strap Charger USB Cable Silicon Grease Using BulletHD for Water Sports Remind you to put some silicon grease to the rubber O-ring from time to time, especially before using underwater. Make sure the rear cap ③ was closed tight.
Bullet HD OVERVIEW ①LED ②Power / Shutter ③Rear Cap ④Mode Switch ⑤USB ⑥Plug MicroSD Card Slot ⑦Battery ⑧Microphone ⑨1080P / 720P Mode Switch ⑩ INITIAL SET UP 1. Make sure the Bullet HD is OFF before adding or removing the memory card! 2.
Bullet HD is power off. Date & Time Setting Download the Rtc.txt file from www.Bullethd.us - Support – Date & Time Quick Setup for PRO1080p Open the file “Rtc.txt and change the date & time as follows: YYYY.MM.DD hh:mm:ss...
Micro SD card is full. Playback on your computer Power off the BulletHD! Screw the rear cap ③, connect with your computer via USB cable from the USB port ⑤,then turn on the device! The driver would be automatically installed.
1. Download the latest firmware at www.BulletHD.us - Support – Firmware for PRO1080p into your MicroSD card. 2. Screw the rear cap ③ , install your MicroSD card to BulletHD PRO1080p 3. Switch ⑩ to firmware mode. F = Firmware 4.
Check with us before giving up on your BulletHD! http://www.BulletHD.us/repairs/ You might be able to fix your BulletHD even if you think they are broken and beyond hope. We're the great problem-solvers, and you are able to fix at home whatever is possible to repair your BulletHD with your hands. We want to help you get the full value from your camcorder;...
Product size: 104 x 32 x 32 mm Weight: 105g Operating System: OS (USB Drive): Win ME, Win7, 2000, XP, Vista; Mac OS X 10.6+ OS (Webcam): Win7, XP, Vista Mount Packages Mount Package A: 360 Mount for Handlebar / Vented Helmet + Hand Safety Strap Allows you to fit with any standard 29mm handle bar with a 360 degree rotation! Or you...
Page 12
Mount Package D: Universal Mount Adapter + Camcorder Mount Adapter + Hand Safety Strap + Adjustable Silicon Strap 2 pcs Universal Mount Adapter has a “female” ¼"-20 screw on the bottom to fix with any mounts or tripods that have their own “male” ¼”-20 screw. 2 pieces of flexible &...
Page 13
Mount Package G: Flat Surface Mount + Sound Cap + Aluminum Mount Adapter With a magic mat allows your Bullet HD Wearable Camcorder to stick with any flat surface or glass surface. Based by a multi position metal ball, you can shoot at any angel. Make sure it’s fixed well, you are ready to go! Mount Package H: Travel Case + Battery + Sound Cap...
Page 14
+ Aluminum Mount Adapter + Sound Cap Solutions provided for motorcycles, aeroplanes, or any flat surface you can think of. Holds BulletHD steady all day long, yet you can easily remove the unit for safe keeping at the end of the day.
Page 15
BulletHD Front Cap Break the lens in your extreme sports? Before giving up your BulletHD, you may be able to fix them even you think they are beyond hope. We want to help you get the full value from your BulletHD.
Page 16
Mount Package Q: BulletHD Front Cap 2 sets + Battery + Bag + 27mm O-ring x 10pcs + Silicon Grease Mount Package R: Wide Angle lens + BulletHD Front Cap + Velvet Cloth+ 27mm O-ring x 10pcs + Silicon Grease This is the time for an extra 135 degree Wide Angle lenses for your sports camera.
The warranty does not cover any damage that may occur during a sport activity. It is the users responsibility to secure the BulletHD securely to any sport equipment. WARNING: The form and functions of BULLETHD, accessories, logos, and all graphics are the patented, protected property of Silver Creation International Ltd.
Page 20
Let’s do something for our planet!! Please download the drivers & software from our official webpage: www.BulletHD.us/support Environmental friendly...