Led Status P6; Initial Set Up P6 - BulletHD Biker Pro Manual

LED Status
Status Table
LED Colour
Power On
Standby
Taking Video
Stop Video
Card Slot
Empty
MicroSD Card
Full
Battery Charing
Low Battery
REMARKS:
THE SPECIFICATION IS SUBJECT TO CHANGE WITHOUT NOTICE.
Initial Set Up
1. Please ensure the camcorder is OFF before insert or take
out the Micro SD card!
2. Open the Micro SD card slot cover.
3. Install a micro SD memory card (max up to 64GB(FAT32))
into the card slot.
4. If no micro SD memory is inserted in the BIKER PRO, the
Status Indicator Light will blink red and blue.
5. When using a micro SD memory card in the BIKER PRO,
there should be no data from other devices on the card. If
you are using a micro SD memory card for the first time in
the BIKER PRO, first you should format the card in your
computer.
Recording Charging Indicator
Indicator LED LED
RED RED
On On
On On
Flashing On
On On
Fast
On
Flashing
Fast
On
Flashing
On On
On On
Status Indicator LED
BLUE RED
Flashing On
Off On
Slowly
brighten,
Off
then slowly
turn dark
Off On
Off Flashing
Fast
Off
Flashing
Off On
On On
6
Buzzer
BLUE -
Off 3 Times
Off Off
Connected(On),
Connecting
1 Time
(Flashing),
Disconnect(Off)
Off 2 Times
Flashing 2 Seconds
Off 4 Times
Off Off
Off Off