Table of Contents
Advertisement
Power ON/OFF By Pressing Button
Turn
BIKER MATE
ON
Turn
BIKER MATE
OFF
Card Slot Empty
If there is no Micro SD card in the camera, the red and blue
LED will flash for 30 seconds. Then, the camera will switch
OFF automatically.
Card Slot Full
If loop feature is set OFF, the microSD card will run out of
memory storage. The camera will then shut down automatically
30 seconds after the card is Full.
Friendly reminder:
Please insert the Micro SD card before using the camera!
Turn ON the BIKER camera by pressing the Power
button once. The BIKER MATE will beep 3 times，Blue
LED will flash on Charging Indicator and Red LEDs on
Status and Lens Module will be steady ON. A single
beep will indicate Recording with Red LED flashing on
Lens Module and slowly blinking on Status Indicator.
Turn the BIKER camera OFF by pressing and holding
the Power button for at least 2 seconds (Long Press).
The Blue LED flashes on Charging Indicator and will
beep 6 times and all LEDs turn OFF.
8
Advertisement
Table of Contents
