Take A Video (Manual) P10; Loop Recording P10 - BulletHD BIKER MATE User Manual

Video camera system riding video cam
Table of Contents

Advertisement

Remember to insert a micro SD card before you start taking videos!
Mode
FAT32 Formatted
1080P @30FPS
720P @60FPS
Take a Video (Manual)
Turn ON the BIKER MATE by pressing the Power button.
The Camera beeps 3 times with lens/status twin LEDs flashing
Red and the Charger LED flashing Blue. At the fourth beep, the
camera automatically starts recording slow blinking twin status
LEDs Red and flashing Lens LED Red. To STOP recording,
press the STOP button once and camera is in Standby mode
after 2 beeps and all LEDs steady RED. To completely switch
OFF the Camera, Long Press the Power button.
Loop Recording
This special feature allows the user to continously record the
video clips without running out of storage memory. When Loop
ON mode Is selected, the oldest video clips are recorded over
by the current videos. If this feature is set OFF, the camera will
shut down automatically 30 seconds after the memory storage
on the card is Full.
Storage Chart Micro SD Card
4GB
8GB
30 mins
60 mins
35 mins
70 mins
Video
16GB
120 mins 235 mins
140 mins
10
32GB
64GB
470 mins
270 mins
530 mins

Advertisement

Table of Contents
loading

Table of Contents