Charging The Battery; Date & Time Setting; Take A Video - BulletHD Pro 1080P User Manual

Charging the battery

Screw out the rear cap located at the rear of the Bullet HD ③ and Plug the
USB charger to the Bullet HD. The Green light is on while charging, goes off
when the battery is fully charged. On the first use charge the battery 10 hours
before use! You can record up to 60~90 minutes with one charge.
Power on/off your BulletHD
Turn Bullet Press and hold the POWER/Shutter button for 3 seconds to
HD On power on, the blue led will turn, indicating the Bullet HD is
power on and comes to standby mode.
Turn Bullet Long press for another 3 seconds to power off. Bullet HD will
HD Off vibrate twice, indicating the Bullet HD is power off.
Date & Time Setting
Download the Rtc.txt file from www.Bullethd.us - Support – Date & Time
Quick Setup for PRO1080p
Open the file "Rtc.txt and change the date & time as follows:
YYYY.MM.DD hh:mm:ss
Y = year
M = month
D = day
Then copy the file to memory card! Now you can take a photo or video to test
it!
Remember to place an optional MicroSD card before your recordings!

Take a Video

To confirm the Bullet HD is in video mode, screw out the rear cap ③, and the
video/photo switch "④" must be to right for video recording standby mode.
Turn on the Bullet HD and the Blue LED on! Then press the Power/Shutter
button quick once again to start video recording. Red LED light will blink while
video is recording. Please the same button to stop recording!
h = hour
m = minutes
s = second