Air Valve With Stroke Indicator Assembly - Sandpipper S05 Operating And Service Manual

air Valve with Stroke Indicator assembly

1-K
1-J
1-I 1-l
1-D
1-F
1-C
1-E
Air distribution Valve Servicing
See repair parts drawing, remove screws.
Step 1: Remove end cap retainer (1-G).
Step 2: Remove end cap (1-E), bumper (1-D).
Step 3: Remove spool part of (1-B) (caution, do not scratch).
Step 4: Press sleeve (1-B) from body (1-A).
Step 5: Inspect O-Rings (1-C) and replace if necessary.
Step 6: Lightly lubricate O-Rings (1-C) on sleeve (1-B).
Step 7: Press sleeve (1-B) into body (1-A).
Step 8: Reassemble in reverse order.
note: Sleeve and spool (1-B) set is match ground to a specified clearance
sleeve and spools (1-B) cannot be interchanged.
www
s05mdl1sm-rev1113
1-A
1-G
. .
sandpiperpump com
1-H
1-B
1-B
Main Air Valve Assembly Parts list
Item Part Number
1 031.167.000
1-A 095.106.559
1-B 031.134.000
1-C 560.101.360
1-D 132.030.552
1-E 165.123.147
1-F 560.029.360
1-G 675.062.115
1-H 210.008.330
1-I 530.031.550
1-J 165.109.559
1-K 710.011.115
For Pumps with Virgin PTFE coated hardware:
1 031.167.002
1-G 675.062.308
1-J 710.011.308
(Includes all other items used on 031.166.000 above)
For Pumps with alternate Mesh Muffler or Piped Exhaust:
1 031.169.000
(Includes all items used on 031.167.000 above minus 1-H, 1-I and 1-J)
ATEX Compliant
1-E
1-F
1-C
1-D
description
Air Valve Assembly
Body, Air Valve
Sleeve and Spool Set
O-Ring
Bumper
End Cap
O-Ring
End Cap Retainer
Safety Clip
Muffler
Muffler Cap
Self-Tapping Screw
Air Valve Assembly
End Cap Retainer
Self Tapping Screw
Air Valve Assembly
Model S05 Metallic •
Qty
1
1
1
8
2
2
2
2
1
1
1
4
1
2
4
1
14