Air Valve With Stroke Indicator Assembly - Sandpipper S30 Operating And Servicing Manual

Air Valve with Stroke Indicator Assembly

Note: Stroke Indicator is standard on Spill Containment models
1-D
1-K
1-C
1-E
1-M
1-G
Air Distribution Valve Servicing
See repair parts drawing, remove screws.
Step 1: Remove staple retainer (1-H).
Step 2: Remove end cap (1-E), bumper (1-C).
Step 3: Remove spool part of (1-A) (caution, do not scratch).
Step 4: Press sleeve (1-A) from body (1-B).
Step 5: Inspect O-Ring (1-G) and replace if necessary.
Step 6: Lightly lubricate O-Rings (1-G) on sleeve (1-A).
Step 7: Press sleeve (1-A) into body (1-B).
Step 8: Reassemble in reverse order.
Note: Sleeve and spool (1-A) set is match ground to a specified clearance
sleeve and spools (1-A) cannot be interchanged.
13
• Model S30 Metallic
1-J
1-G
1-F
1-B
1-H
1-G
1-M
1-C
1-A
NOTE: CHECK GAP AFTER ASSEMBLY
TO INSURE COMPLETE
INSTALLATION OF RETAINING RING
Air Valve Assembly Parts List
Item Part Number
1 031-146-000
1-A 031-143-000
1-B 095-119-559
1-C 132-039-551
1-D 165-096-559
1-E 165-156-147
1-F 530-028-550
1-G 560-020-360
1-H 675-068-115
1-J 710-015-115
1-K 210-008-330
1-M 560-029-360
For Pumps with PTFE Coated Hardware:
1 031-146-002
1-J 710-015-308
(includes all other items on 031-146-000 above)
For Pumps with Piped Exhaust:
1 031-147-000
(includes all items on 031-146-000 minus 1-D, 1-F, & 1-J)
ATEX Compliant
sandpiperpump
s30mdl1sm-rev0316
1-E
Description
Air Valve Assembly
Sleeve and Spool Set w/Pins
Body, Air Valve
Bumper
Cap, Muffler
Cap, End
Muffler
O-Ring
Staple
Screw, Self-Tapping
Clip, Safety
O-Ring
Air Valve Assembly
Screw, Self Tapping
Air Valve Assembly
.
com
Qty
1
1
1
2
1
2
1
8
2
4
1
2
1
4
1