Table of Contents
Advertisement
Disassembly
1. Remove two screws L.
2. Remove two screws O.
3. Take the upper case 2 and the battery cover A.
4. Disconnect two connectors CN602 and CN603.
5. Remove two screws N.
6. Take out the camera unit J.
Assembly
Assembly of the QV-10 can be performed in the reverse order of the disassembly steps.
Points of assembly work and procedure.
1. Not to damage the slide switch.
Gently set the switch knob to the point of the slide switch.
Confirm that the point of the slide switch is inserted into the switch knob.
Push the upper case in the direction of the lower case.
2. Push hard the upper case with both hands in the direction of the lower case.
DISASSEMBLY AND ASSEMBLY
25
— 17 —
24
20
22
11
2
12
Advertisement
Table of Contents
