Charging A Battery - Agilent Technologies N9342C User Manual

Charging a Battery

You may charge the battery both in the tester and
in the external battery charger (option BCG).
Connect the automotive adapter to the IT power outlet of your
CAU TI O N
CAU -
automobile (with option 1DC) for battery recharging.
1 Insert the battery in the analyzer.
2 Plug in the AC- DC adapter and switch on the
external power.
3 The charge indicator lights, indicating that the
battery is charging. When the battery is fully
charged, the green charging indicator turns off.
During charging and discharging, the battery
voltage, current, and temperature are monitored. If
any of the monitored conditions exceed their safety
limits, the battery will terminate any further
charging or discharging until the error condition is
corrected.
The charging time for a fully depleted battery, is
approximately four hours.
N9342C/43C/44C User's Guide
Getting Started 2
17