D-Link DCS-5222L User Manual page 60

Section 5 - Troubleshooting
Technical Specifications - I/O Terminal Application
Typically used in association with programming scripts for developing applications for motion detection, event triggering, alarm notification via
e-mail, and a variety of external control functions. The 4-pin I/O Terminal Block is located on the rear panel and provides the interface of a photo-
coupled switch output and a photo-coupled input.
Connector Pin Assignment
Sign
DO-
DO+
DI-
DI+
Monitoring and Controlling
By entering http requests in your browser's URL field, you can:
• Monitor the status of digital input.
• Drive the output switch on or off.
Interface Schematic
Output device (load) is driven by external AC or DC power supply.
Input device (active control device) has independent power supply.
D-Link DCS-5222L/DCS-5211L User Manual
FUNCTION
Photo-Relay OUTPUT (Normal Open)
Photo-Relay OUTPUT(Common)
Photo-Relay INPUT (-)
Photo-Relay INPUT (+)
SPECIFICATION
Close circuit current max. 70 mA AC, or 100 mA DC.
On-Resistance max. 30 Ohm.
Open circuit blocking voltage
max. 240VAC or 340VDC
Active High voltage 2.5~25VDC
Inactive Dropout voltage 0~1.5 VDC
Internal on-current has limit at 7mA
to protect the photo-relay.
DO-
DO+
AC/ DC
Load
51