Using The Configuration Menu - D-Link DCS-5222L User Manual

Section 4 - Configuration

Using the Configuration Menu

After completing the Camera Setup Wizard, you are ready to use your camera. The camera's built-in Web configuration utility
is designed to allow you to easily access and configure your DCS-5222L/DCS-5211L. At the end of the wizard, click Go To
Camera, or enter the IP address of your camera into a web browser, such as Internet Explorer . To log in, use the User name
®
admin and the password you created in the Setup Wizard. If you did not create a password, the default password is blank.
After entering your password, click OK.
Note: If you are directly connecting your PC to the camera, or if you or using the camera on a closed network, the
default IP is 192.168.0.20.
D-Link DCS-5222L/DCS-5211L User Manual 21