Pairing Your Headset - Cardo Systems S-800 Quick Manual

The fully charged battery offers up to 8 hours talk time and up to
one week standby time.

2. Pairing your Headset

Before you can use your headset you must pair the headset to your
Bluetooth-enabled mobile phone. If you do not have a Bluetooth-enabled
mobile phone, please visit http://cardosystems.com/adapter2.php for
information on the Cardo BTA II Bluetooth Adapter.
1. Turn on your phone and turn ON its Bluetooth function.
2. Make sure the headset is turned OFF, then press and hold the
Power Button for approximately 8 seconds until the LED status
indicator begins alternating blue and red, indicating that the
headset is in Pairing Mode.
3. Set the phone to search for Bluetooth devices by following the
instructions in the phone's user guide. This is usually found in the
phone's Bluetooth menu and may referred to as "discover" or
"add" a device.
4. After a few seconds, the phone will list the "Cardo S-800" as a
discovered device. Select it from the list and press "OK" or "Yes".
4
Cardo S-800 ™