Page 1
Installation and operating instructions Zip Chillmaster ® Floor Mounted Chiller CH101 Floor mounted chiller Affix model number label here 81585UK Page 1 of 12 81585UK Zip Chillmaster - Installation & operating instructions - Mar 2016 v1.05...
Cleaning ................................ Page 9 Service ................................Page 9 End of life disposal ............................Page 10 Warranty information ........................... Page 11 Contact details ............................. Page 12 81585UK Zip Chillmaster - Installation & operating instructions - Mar 2016 v1.05 Page 2 of 12...
Repairs must only be carried out by Zip Water UK or an authorised Zip service engineer. If the power supply cable is damaged it must be replaced by a Zip service engineer or a qualified electrician. The cross sectional area of the power supply cable must be appropriate for the power rating and location of the appliance.
Tap: Chrome plated brass, heavy duty, lever action tap with swivel head. Outer case: Brushed finish stainless steel case with front access panel. Filtration type: Submicron filtration. Dimensions: Height: 915mm, Width: 350mm, Depth: 350mm 81585UK Zip Chillmaster - Installation & operating instructions - Mar 2016 v1.05 Page 4 of 12...
Optional Pressure reducer set at 0.35MPa (3.5 bar) The Optional ZG500 Installation Kit allows the Zip Chillmaster to be installed fully in accordance with the requirements of BREEAM Health & Wellbeing Credit HEA 16 (Drinking Water) by enabling the chiller to be securely attached to both the wall and the floor as well as providing security covers to protect the water and electrical connections.
The rear of the unit can be flush mounted against the surface of a wall if the plumbing permits. 167mm Drain 58mm 1/2” BSP female Inlet cold inlet Electrical 12 - 25mm connection 350mm 350mm 81585UK Zip Chillmaster - Installation & operating instructions - Mar 2016 v1.05 Page 6 of 12...
Electrical Electrical connection is to be made by a Zip Service Engineer or a qualified electrician. Installation must comply with current IEE regulations and any Local Authority requirements. Appliance to be wired to a double pole switched fused spur with a minimum breaking capacity of 13 amps. The supply flex should be minimum 3 core 0.75mm...
Not changing the filter cartridges when required may cause the water to become biologically unsafe. Use only a Zip filter to match the one used in your system product (see Spare parts and accessories page 5). The filter cartridge can be obtained through plumbing suppliers or direct from Zip.
Before calling for service, check that both the water and electricity supplies are turned ‘ON’ and functional. Call an electrician, a plumber, or Zip customer service for assistance, service, spare parts, or enquiries. Zip customer service 0845 600 5005 or 0345 6 005 005.
In order to preserve our environment we ask that you dispose of this product correctly. Please contact Zip Customer Service for advice on 0845 6 005 005 or 0345 6 005 005. 81585UK Zip Chillmaster - Installation & operating instructions - Mar 2016 v1.05...
Furthermore, this warranty does not displace any statutory warranty, but, to the extent to which Zip is entitled to do so, the liability of Zip under any statutory warranty will be limited at Zip’s option to the replacement of the appliance or supply of equivalent appliance, the payment of the cost of replacing the appliance or acquiring an equivalent appliance, or the payment of the cost of having the appliance repaired or the repair of the appliance.
Zip Water UK 14 Bertie Ward Way, Dereham, Norfolk, NR19 1TE Telephone 0845 6005 005 Mobile 0345 6005 005 www.zipwater.com/uk e-mail info @ zipindustries.co.uk 81585UK Zip Chillmaster - Installation & operating instructions - Mar 2016 v1.05 Page 12 of 12...
Need help?
Do you have a question about the CH101 and is the answer not in the manual?
Questions and answers