1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. PCI Card
  5. HSB-811P
  6. Manual

Aaeon HSB-811P Manual

Half-size cpu card onboard intel celeron m 600/ non-cache processors half-size cpu card with ddr, ethernet, compactflashtm & mini pci
Hide thumbs
Table of Contents

Advertisement

Quick Links

H a l f - s i z e C P U C a r d
H S B - 8 1 1 P
HSB-811P
®
®
Onboard Intel
Celeron
M
600/ non-cache Processors
Half-size CPU Card
With DDR, Ethernet,
CompactFlash™ & Mini PCI
HSB-811P Manual Rev. A 2nd Ed.
May 2009

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HSB-811P and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aaeon HSB-811P

Summary of Contents for Aaeon HSB-811P

  • Page 1 H a l f - s i z e C P U C a r d H S B - 8 1 1 P HSB-811P ® ® Onboard Intel Celeron 600/ non-cache Processors Half-size CPU Card With DDR, Ethernet, CompactFlash™ & Mini PCI HSB-811P Manual Rev. A 2nd Ed. May 2009...
  • Page 2 AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
  • Page 3 H a l f - s i z e C P U C a r d H S B - 8 1 1 P Acknowledgments All other products’ name or trademarks are properties of their respective owners. Award is a trademark of Award Software International, Inc. CompactFlash™...

  • Page 4: Packing List

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P Packing List Before you begin installing HSB-811P, please make sure that the following items have been shipped: •...

  • Page 5: Table Of Contents

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P Contents Chapter 1 General Information 1.1 Introduction..............1-2 1.2 Feature ..............1-4 1.3 Specification .............. 1-5 Chapter 2 Quick Installation Guide 2.1 Safety Precaution ............
  • Page 6 H a l f - s i z e C P U C a r d H S B - 8 1 1 P 2.18 AC97 Connector (CN2) ........... 2-12 2.19 LVDS Channel Connector (CN3) ......2-13 2.20 PS/2 keyboard & Mouse Connector (CN4) ..... 2-14 2.21 Internal Keyboard Connector (CN5)......

  • Page 7: Chapter 1 General Information

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P Chapter General Information Chapter 1 General Information...

  • Page 8: Introduction

    (SBC) with an onboard VGA, 10/100/1000Mb LAN optional and five USB 2.0 ports, support LVDS. The target market of HSB-811P will focus on Shoe-box application and Digital Video Recorder (DVR). Releasing the HSB-811P will ®...
  • Page 9 Type A connector onboard, offering 480 Mbps high-speed efficiency and value without compromising performance. ® Moreover, HSB-811P is also equipped with Intel Ethernet controllers. One of these provides superior 1GB Mbps networking access ability for high speed networking applications such as gateway, VPN and Mini server.

  • Page 10: Feature

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P 1.2 Feature • ® ® Onboard Intel Celeron M 600/non-cache CPU • DDR266 Memory Supports Up to 2GB •...

  • Page 11: Specification

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P 1.3 Specification System ® CPU: Support onboard Intel ® Celeron M 600/non-cache ® Chipset: Intel 82852GM+82801DB (ICH4) ®...
  • Page 12 H a l f - s i z e C P U C a r d H S B - 8 1 1 P mini-PCI Type III socket Battery: Lithium battery (BR2335) Power Supply Voltage: +12V ATX, Standard ATX Power Connector VGA Controller: Integrated on ®...
  • Page 13 H a l f - s i z e C P U C a r d H S B - 8 1 1 P Display ® Chip: Intel 82852GM Memory size: Shared memory up to 64MB Enhanced IDE Interface：ATA100 x 2 channels (supports two ATAPI devices for each channel) FDD Interface:...
  • Page 14 H a l f - s i z e C P U C a r d H S B - 8 1 1 P OS Support Request ® Windows 98SE ® Windows 2000 Pro ® Windows XP Pro Linux Red Hat ®...

  • Page 15: Chapter 2 Quick Installation Guide

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P Chapter Quick Installation Guide Notice: The Quick Installation Guide is derived from Chapter 2 of user manual. For other chapters further installation...

  • Page 16: Safety Precaution

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P 2.1 Safety Precaution Always completely disconnect the power cord from your board whenever you are working on it.

  • Page 17: Location Of Connectors And Jumpers

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P 2.2 Location of Connectors and Jumpers Component Side IDE1 IDE2 USB1 USB2 USB3 VGA1 LAN1 Chapter 2 Quick Installation Guide...
  • Page 18 H a l f - s i z e C P U C a r d H S B - 8 1 1 P Solder Side DIMM1 CFD1 DIMM0 Chapter 2 Quick Installation Guide...

  • Page 19: Mechanical Drawings

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P 2.3 Mechanical Drawings Component Side 3.99 3.02 177.98 16.51 13.84 30.48 12.27 9.32 184.99 14.1 12.55 6.27 13.4 14.5...
  • Page 20 H a l f - s i z e C P U C a r d H S B - 8 1 1 P Solder Side 3.02 3.99 177.98 12.27 30.48 13.84 16.51 9.32 184.99 Chapter 2 Quick Installation Guide...

  • Page 21: List Of Jumpers

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.
  • Page 22 H a l f - s i z e C P U C a r d H S B - 8 1 1 P IrDA Connector LPT1 LPT Port Connector USB1~3 USB Connector (Type-A) USB4 USB Connector (5x2 pin header) 10/100 or 100/1000 Base-TX Ethernet LAN1 Connector...

  • Page 23: Setting Jumpers

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.

  • Page 24: Clear Cmos (Jp1)

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P 2.7 Clear CMOS (JP1) Function Close Clear Open Protected (Default) 2.8 LCD Voltage Selection (JP2) Function +3.3 V (Default) 2.9 Front Panel Connector (FP1) Signal...

  • Page 25: Rs-232/422/485 Serial Port Connector (Com2)

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P N.C. 2.12 RS-232/422/485 Serial Port Connector (COM2) Signal Signal RXD (422RXD+) (422TXD-/485DATA-) DTR (422RXD-) (422TXD+/485DATA+) N.C. 2.13 IrDA Connector (IR1) Signal N.C.

  • Page 26: Usb Connector (Usb4)

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P DATA3 DATA4 DATA5 DATA6 DATA7 #ACK BUSY SELECT N.C. 2.15 USB Connector (USB4) Signal Signal USBD1- USBD1+ USBD2+ USBD2-...

  • Page 27: Ac97 Connector (Cn2)

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P 5VSB 2.18 AC97 Connector (CN2) Signal Signal AC_RST- AC_SYNC AC_DAIN2 AC_DAOUT AC_BCLK LOCK +3.3V 2.19 LVDS Channel Connector (CN3) Signal Signal BKLEN...

  • Page 28: Ps/2 Keyboard & Mouse Connector (Cn4)

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P 2.20 PS/2 Keyboard & Mouse Connector (CN4) Signal KB_DATA MS_DATA KB_CLK MS_CLK 2.21 Internal Keyboard Connector (CN5) Signal KB_CLK KB_DATA...
  • Page 29 H a l f - s i z e C P U C a r d H S B - 8 1 1 P Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅...

  • Page 30: Chapter 3 Award Bios Setup

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P Chapter Award BIOS Setup Chapter 3 Award BIOS Setup...
  • Page 31 3. The CMOS memory has lost power and the configuration information has been erased. The HSB-811P CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the complete unit when it runs down.
  • Page 32 H a l f - s i z e C P U C a r d H S B - 8 1 1 P 3.2 Award BIOS Setup Awards BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in CMOS RAM so that it retains the Setup information when the power is turned off.
  • Page 33 Save CMOS changes to CMOS and exit setup. Exit Without Saving Abandon all CMOS changes and exit setup. For more detailed information, you can refer to the "AAEON BIOS Item Description.pdf" file in the CD for the meaning of each setting in this chapter.

  • Page 34: Chapter 4 Driver Installation

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P Chapter Driver Installation Chapter 4 Driver Installation...
  • Page 35 H a l f - s i z e C P U C a r d H S B - 8 1 1 P The HSB-811P comes with a CD-ROM that contains all drivers your need. Follow the sequence below to install the drivers: ®...
  • Page 36 H a l f - s i z e C P U C a r d H S B - 8 1 1 P 4.1 Installation: Insert the HSB-811P CD-ROM into the CD-ROM Drive. And install the drivers from Step 1 to Step 4 in order. ®...
  • Page 37 H a l f - s i z e C P U C a r d H S B - 8 1 1 P System Select Device Manager under the Hardware category. Double click on the Ethernet controller and select reinstall Driver button under the General category.
  • Page 38 H a l f - s i z e C P U C a r d H S B - 8 1 1 P 1. Click on the USB to CF Controller Driver for Win9x folder. 2. Follow the instructions that the window shows. 3.

  • Page 39: Appendix A Programming The Watchdog Timer

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P Appendix Programming the Watchdog Timer Appendix A Programming the Watchdog Timer...

  • Page 40: Programming

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P A.1 Programming HSB-811P utilizes ITE 8712 chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the AAEON intial watchdog timer program is also attached based on which you can develop customized program to fit your application.
  • Page 41 H a l f - s i z e C P U C a r d H S B - 8 1 1 P There are three steps to complete the configuration setup: (1) Enter the MB PnP Mode; (2) Modify the data of configuration registers; (3) Exit the MB PnP Mode.
  • Page 42 H a l f - s i z e C P U C a r d H S B - 8 1 1 P Configure Control (Index=02h) This register is write only. Its values are not sticky; that is to say, a hardware reset will automatically clear the bits, and does not require the software to clear them.
  • Page 43 H a l f - s i z e C P U C a r d H S B - 8 1 1 P WatchDog Timer Control Register (Index=71h, Default=00h) WatchDog Timer Configuration Register (Index=72h, Default=00h) WatchDog Timer Time-out Value Register (Index=73h, Default=00h) Appendix A Programming the Watchdog Timer...

  • Page 44: Ite8712F/Hx Watchdog Timer Initial Program

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P B.2 ITE8712F/HX Watchdog Timer Initial Program .MODEL SMALL .CODE Main: CALL Enter_Configuration_mode CALL Check_Chip mov cl, 7 call Set_Logic_Device ;time setting mov cl, 10 ;...
  • Page 45 H a l f - s i z e C P U C a r d H S B - 8 1 1 P ; game port enable mov cl, 9 call Set_Logic_Device Initial_OK: CALL Exit_Configuration_mode MOV AH,4Ch INT 21h Enter_Configuration_Mode PROC NEAR MOV SI,WORD PTR CS:[Offset Cfg_Port] MOV DX,02Eh...
  • Page 46 H a l f - s i z e C P U C a r d H S B - 8 1 1 P Exit_Configuration_Mode ENDP Check_Chip PROC NEAR MOV AL,20h CALL Read_Configuration_Data CMP AL,87h JNE Not_Initial MOV AL,21h CALL Read_Configuration_Data CMP AL,12h JNE Not_Initial Need_Initial:...
  • Page 47 H a l f - s i z e C P U C a r d H S B - 8 1 1 P MOV DX,WORD PTR CS:[Cfg_Port+06h] IN AL,DX Read_Configuration_Data ENDP Write_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL XCHG AL,AH MOV DX,WORD PTR CS:[Cfg_Port+06h] OUT DX,AL...
  • Page 48 H a l f - s i z e C P U C a r d H S B - 8 1 1 P push ax push cx xchg al,cl mov cl,07h call Superio_Set_Reg pop cx pop ax Set_Logic_Device endp ;Select 02Eh->Index Port, 02Fh->Data Port Cfg_Port DB 087h,001h,055h,055h DW 02Eh,02Fh...

  • Page 49: Appendix B I/O Information

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P Appendix I/O Information Appendix B I/O Information...

  • Page 50: I/O Address Map

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P B.1 I/O Address Map Appendix B I/O Information...

  • Page 51: Memory Address Map

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P B.2 Memory Address Map Appendix B I/O Information...

  • Page 52: Irq Mapping Chart

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P B.3 IRQ Mapping Chart B.4 DMA Channel Assignments Appendix B I/O Information...

  • Page 53: Appendix C Mating Connector

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P Appendix Mating Connector C - 1 Appendix C Mating Connector...

  • Page 54: List Of Mating Connectors And Cables

    H a l f - s i z e C P U C a r d H S B - 8 1 1 P C.1 List of Mating Connectors and Cables The table notes mating connectors and available cables. Connector Function Mating Connector Available...
  • Page 55 H a l f - s i z e C P U C a r d H S B - 8 1 1 P Connector IrDA JIH VEI 21B12050-XXS Connector Electronics 10B-01G-4/2.8 N003 @ 0011-100 Compact SPEED N016@014 CFD1 Flash TECH 0-104+N01 Header...

Table of Contents