Description of this configuration page is as follows:
For Status, select Enabled or Disabled to enable or disable
the NAT function.
For Name, enter a name for the NAT entry.
For Inside IP and Inside Port, enter the IP address and port
of a LAN computer. In case the external network accesses
the internal network, the request will be forwarded to the
specified LAN computer.
For Protocol Type, select the protocol for NAT from the
drop-down list. You can select TCP, UDP or Both.
For Outside Port, enter the outside port of an external
access.
After configuration, click Apply to save the settings, or click Clear
to clear the settings.
Figure 3-32 NAT entry configuration
Huawei Technologies Proprietary
44