you connect to a remote corporate LAN
To add an IP route, click New to display the configuration page as
shown in Figure 3-16.
Description of the parameters is as follows:
IP Address specifies the IP address of the destination
computer. You can enter the IP address of a specific
computer or an entire network. The IP address can also be
specified as all zeros to indicate that this route is applied to
all destinations that have no specified routes.
Subnet Mask specifies the subnet mask of the destination
computer.
Gateway specifies the address of the gateway through
which data to the destination computer will be forwarded.
After configuration, click Apply to save the settings, or click Clear
to clear the settings.
Figure 3-16 IP routing
Huawei Technologies Proprietary
28