Huawei EchoLife HG520 User Manual page 35

HG520 provides multiple wireless modules. Select a
suitable one from the Module drop-down list. The
modulation modes available are 802.11B, 802.11G, High
Rate and Auto.
Select the network authentication mode.
If you select Open, the data will not be encrypted.
If you select Shared, HG520 will use WEP (Wired
Encryption Protocol) to encrypt data through predefined
key. HG520 offers 64-bit ASCII/Hex and 128-bit
ASCII/Hex encryption, with four keys available. Select
an encryption level from the WEP drop-down list, and
then enter a WEP key with proper length.
If you select WPA-PSK, HG520 will use the simplified
WPA (Wi-Fi Protected Access) to encrypt data. WPA is
designed to provide improved data encryption and user
authentication. HG520 provides TKIP (Temporal Key
Integrity Protocol) and AES (Advanced Encryption
Standard) arithmetic. Enter a key with proper length.
If you select WPA, you need to enter the RADIUS server
IP address, port number and RADIUS secrite (the
password used by external radius server, the length of
Radius Secrite must be 1–64)
You can select Enabled for Intra BSS to enable different
wireless devices in your LAN to access Internet and
communicate with each other.
Intra BSS traffic is traffic between wireless stations in the
same BSS. If there are two wireless stations connecting to
Internet through HG520 and the Intra-BSS function is
enabled, both stations can access Internet and
Huawei Technologies Proprietary
26