Denon DN-D4000 Service Manual page 9

QQ
3 7 63 1515 0
4. Error Code Table
Error Code
E001
E002
E003
E004
E005
E006
E007
E008
E009
E00A
E00B
E00C
E00D
E00E
E00F
E010
E011
E012
E013
E014
E015
E016
E017
TE
L 13942296513
E018
E019
E01A
E01B
E01C
E01D
E01E
E01F
E020
E0216 *
E0213 *
E022
E023
E024
E025
E026
E027
E028
E029
E030
www
.
http://www.xiaoyu163.com
Unable to close the loader tray in the regulation time.
Unable to open the loader tray in the regulation time.
Inner circle switch ON error even if the time is over.
Inner circle switch OFF error even if the time is over.
The focus offset adjustment result is outside the regulation range.
Unable to adjust the focus offset in the regulation time.
The tracking offset adjustment result is outside the regulation range.
Unable to adjust the tracking offset in the regulation time.
The FE peak is outside the regulation range.
The FE peak is outside the regulation range.
Unable to adjust the focus rough gain in the regulation time.
The focus rough gain is outside the regulation range.
Unable to actuate focus in the regulation time.
Unable to actuate tracking in the regulation time.
Unable to adjust the tracking rough gain in the regulation time.
The tracking rough gain is outside the regulation range.
Unable to adjust the tracking balance in the regulation time.
The tracking balance adjustment result is outside the regulation range.
Focus servo down during automatic adjustment.
Focus servo down during automatic adjustment.
Unable to adjust the focus balance in the regulation time.
The focus balance adjustment result is outside the regulation range.
Track servo down during automatic adjustment.
Unable to adjust the focus fine gain in the regulation time.
The focus fine gain is outside the regulation range.
Unable to adjust the tracking fine gain in the regulation time.
The tracking fine gain is outside the regulation range.
Unable to adjust automatically in the regulation time.
Unable to read the subcode Q in the regulation time.
Unable to read the TOC in the regulation time.
Focus servo down during search (over the regulation time).
Track servo down during search (over the regulation time).
Servo error during search.
Search error (over the regulation time).
Discontinuity occurred, during write to the DRAM.
The error which cannot be corrected to the read data.
Unable to do the level detect.
Unable to join data in the regulation time.
The error rate when recording on the memory is over the regulation value.
The subcode jump more than regulation.
Servo error when power is turned on.
Subcode Q error.
Inter face error for both drives.
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
CONTENTS
Q Q
3 6 7 1 3 1 5
co
.
9
DN-D4000
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9
9 9
9 9