Chapter 2 Hardware Installation; The Front Panel - TP-Link TD-W8961ND User Manual

TD-W89

Chapter 2 Hardware Installation

2.1 The Front Panel

The LEDs locate on the front panel. They indicate the device's working status. For details, please
refer to LED Explanation.
LED Explanation:
Name
(Power)
(ADSL)
(INTERNET)
(WLAN)
(WPS)
61ND 300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 2-1
Status
The modem router is powered on.
On
The modem router is off. Please ensure that the power adapter
Off
is connected correctly.
ADSL line is synchronized and ready to use.
On
The ADSL negotiation is in progress.
Flash
ADSL synchronization fails. Please refer to
Off
troubleshooting.
The network is available with a successful Internet connection.
On
There is data being transmitted or received via the Internet.
Flash
There is no successful Internet connection or the modem
router is operating in Bridge mode. Please refer to
Off
troubleshooting.
On Wireless is enabled but no data is being transmitted.
The modem router is sending or receiving data over the
Flash
wireless network.
Off Wireless function is disabled.
A wireless device has been successfully added to the network
On
by WPS function.
WPS handshaking is in process and will continue for about 2
minutes. Please press the WPS button on other wireless
Flash
devices that you want to add to the network while the LED is
flashing.
The WPS function is disabled or the wireless device fails to be
Off
added to the network in 2 minutes after WPS function is
Indication
4
Note 1 for
Note 2 for