TP-Link TD854W User Manual page 33

Error! AutoText entry not defined.
IP Pool Range: Specify the start and end IP address for the DHCP server's IP

assignment. The default start and end IP Address are 192.168.1.100 and 192.168.1.200
separately. Please note that both addresses should be smaller than 192.168.1.254.
Default Gateway: The default gateway address.

Max Lease Time: The time that the DHCP client is allowed to maintain the assigned

dynamic IP. After the dynamic IP address has expired, the user will be automatically
assigned a new one. The default is 1440 minutes.
Domain Name: Specify a user-friendly name to refer to the group of hosts (subnet) that

will be assigned addresses from this pool.
DNS Servers: The IP address of DNS server used in option filed of DHCP message.

 Apply Changes: Click this button to save your configuration.

Undo: Click this button to cancel your configuration.

Set VendorClass IP Range: Click this button to and then you will enter the screen as shown
in Figure 4-12. This page allows you to configure the IP address range depending on device's
option60.
Error! AutoText entry not defined. User Guide
Figure 4-11
27