Dpm End-User Recovery Option; Supporting Single Instance Storage On Protected File Servers; Centralized Branch Office Environment - HP ProLiant ML310 G3 Administration Manual

Data protection storage server
Hide thumbs Also See for ProLiant ML310 G3:
Table of Contents

Advertisement

File
servers
Figure 2 Centralized branch office environment

DPM end-user recovery option

The DPM end-user recovery feature allows end users to independently recover data by retrieving shadow
copies of files. To use this feature, you must enable it on your Data Protection Storage Server and on
the end-user client PC. For detailed instructions on enabling the end-user recovery function, please
see Microsoft DPM help.
Supporting Single Instance Storage on protected file servers
This section only applies if one or more of your protected file servers are running Single Instance Storage
(SIS) on a volume protected by DPM. By default ,DPM does not support SIS on a protected volume, but
hotfixes are provided in the c:\hpnas\components\DPM\SIS-QFE folder that can be applied.
SIS works by searching a hard disk volume to identify duplicate files. If SIS finds identical files, it saves
one copy of the file to a central repository, called the SIS Common Store, and replaces other copies
with pointers to the stored versions. If SIS linked files are backed up by DPM, the link information is not
restored properly when the files are restored. To resolve this problem follow the procedure below.
1.
Install the provided DataProtectionManager2006-KB917642.exe on the Data Protection
Storage Server. This hotfix cannot be applied until the DPM mini-setup has been performed. DPM
mini-setup is discussed in your Data Protection Storage Server installation guide.
2.
Go to the Management/Agents tab of the DPM user interface. Update the agent on the protected
file server that uses SIS.
3.
Install the provided WindowsServer2003-KB913109.exe hotfix on both the Data Protection
Storage Server and the protected server.
4.
Go to the Protection tab on the DPM user interface and run a synchronization with consistency check
on the protected volumes.
W A N
DP Storage
End u s e r
Server
r e s t o r e
MSA Arrays
(provided with some DP Storage Servers)
Sn a p s h o t image
o f f ile s e r v e r s
HP ProLiant ML310 G3 Data Protection Storage Server
To tape
10692a
15

Advertisement

Table of Contents
loading

Table of Contents