JVC FS-SD58V Service Manual page 12

FS-SD58V/FS-SD78V/FS-SD98V
<CD mechanism base assembly>
Prior to performing the following procedure, remove
the CD mechanism base assembly.
Removing the speaker terminal board
1. Remove the screws T attaching the speaker terminal
board on the underside of the CD mechanism base
assembly.
Removing the VCD CB assembly
1. Disconnect the card wire from connector CN711 on
the CD mechanism board attached to the CD
mechanism base.
2. Disconnect the wires
CN103 on the VCD CB assembly.
3. Unjoint the six joints (f) with the VCD shield (L) and
the VCD shield (U). Remove the VCD shield (L) in
the direction of the arrow.
4. Remove the VCD CB assembly from the VCD shield
(L).
VCD shield (L)
1-12
(See Fig.29)
(See Fig.30 to 33)
from connector CN102 and
VCD CB board
Fig.33
CD mechanism board
CD mechanism cover
VCD CB assembly
Fig.29
VCD CB assembly
Card wire
CD mechanism board
Fig.30
f
f
CN103
Fig.31
f
f
Fig.32
Speaker terminal board
T
CN711
f
f
CN102
f
VCD shield (L)
f
VCD shield (U)
f