Motorola R765 User Manual page 29

option
Assign to Talkgroup: Assign the knob position to
the Talkgroup name and ID.
Assign to MOTOtalk: Assign the knob position to
the MOTOtalk name, code, and channel. A
channel is a number between 1 and 10. A
code is a number between 1 and 14.
Notes:
• If you do not enter a MOTOtalk name, a
default name is displayed in the format
"MT Channel X, Code Y" .
• Private Only and Receive All codes are
not supported.
4 Press - under Done.
change Talkgroup within a set
1 In the network screen turn the Talkgroup
knob until you reach the desired talkgroup.
2 Wait for timeout. The idle network screen
appears.
Note: The set to which the Talkgroup belongs
is called the active set.
enter and exit MOTOtalk
1 In the network screen turn the Talkgroup
knob until it reaches the required
MOTOtalk.
2 Wait for timeout. Switching to MOTOtalk Please
Wait displays. After a few seconds, the
MOTOtalk idle screen appears.
Note: The MOTOtalk idle screen layout and
functionality differ from those of MOTOtalk
accessed via the main menu.
3 To exit MOTOtalk, turn the Talkgroup knob
until it reaches the required Talkgroup.
4 Wait for timeout. Switching to Network Please
Wait displays. After a few seconds, the
network idle screen appears.
calls 23