Voice Commands - Pivot Verizon TXT8030 User Manual

Note: To skip setting each menus, press the Right Soft Key [Skip].

VOICE COMMANDS

Your phone is equipped with an Advanced Voice Command (AVC) feature.
This feature allows you to make calls or use the phone's functions by
simply using your voice. All you have to do is talk into the phone and then
the phone will recognize your voice and complete tasks by itself.
1. To access Voice Commands from standby mode, press the OK
Key [OK] to unlock the keypad, then press the OK Key [MENU],
select SETTINGS & TOOLS, then swivel to the QWERTY keypad
and press 2. Tools, 1. Voice Commands.
Note: Shortcut: In idle mode, press and hold the CLR Key to access the
Voice Commands menu.
2. The phone displays the Command menu and prompts you to say
the name of the command you want to use. To complete your task,
simply follow the voice prompts. You can speak the name of the
command after you hear a beep.
Note: You can hear a beep in the
Phone Settings > Voice Commands Settings
Tones Only) while you can see a prompt without a beep sound in the
Prompts mode or Readout mode.
3. Select one of the following options by pressing the Directional Key
up or down, press the OK Key [OK]
Call <Name or #> /Send <MSG Type> / Go To <Shortcut> / Check
<Item> / Contact <Name> / Redial / Play <Playlist> /My Verizon /Help
4. When it recognizes one of these commands, the phone launches
62
Tones Only mode (Settings & Tools
> Prompts >
the associated application. If the phone does not hear a command
within approximately eight seconds, AVC mode will turn itself off.
CALL <NAME OR #>
Use the Call command to voice dial a name from your contact list or a
phone number. When dialing a number, pronounce each digit, but do not
pause noticeably between the digits.
1. You will hear
menu will be displayed.
2. If calling a contact from your contact list, say Call <Name>. Your
phone will ask you to confirm the name you said. Say "Yes" if it
was repeated correctly. That phone number will be dialed. If there
is more than one number saved for that contact, you will be asked
to confirm which number to dial.
Examples: - Call Tom Smith, - Call 617 555-1212, - Call Bob
Carson's mobile, - Call Dee Harper at Home.
SEND <MSG TYPE>
>
Mode > Use the Send command to send a text or other type of message to a
specified name or number.
1. You will hear
menu will be displayed.
Say "Send" followed immediately by Text,
Examples: - Send Picture to Dee Harper's Mobile,
- Send Text Tom Smith.
GO TO <SHORTCUT>
Please say a command and the Voice Commands
Please say a command and the Voice Commands
Picture or Voice.