Charging Your Battery; Battery Handling Information - Pivot Verizon TXT8030 User Manual

Table of Contents

Advertisement

CHARGING YOUR BATTERY

1. To charge the phone, open the Charging/Data Jack cover on the top left
side of the phone, and connect the charger
adapter.
2. Plug the other end into a standard outlet.
3. To remove the adapter connection,
squeeze the adapter's side buttons (1) and
pull.
Note :
When you charge the battery with the phone power off, you will see a
charging status screen. You cannot operate the phone until it is
powered on.
The battery is not fully charged at the time of purchase. Fully charge
the battery before use.
It is more efficient to charge the battery with the handset powered off.
Battery operating time gradually decreases over time.
If the battery fails to perform normally, you may need to replace the
12
1
2
1
battery.

BATTERY HANDLING INFORMATION

DO'S
Only use the battery and charger approved for use with the TXT8030.
Only use the battery for its original purpose.
Try to keep batteries in a temperature between 41 °F (5 °C) and 95 °F
(35 °C). If the battery is stored in temperatures above or below the
recommended range, give it time to warm up or cool down before
using.
Store the discharged battery in a cool, dark, and dry place.
Purchase a new battery when its operating time gradually decreases
after fully charging.
Properly dispose of the battery according to local laws.
DON'TS
Don't attempt to disassemble the battery – it is a sealed unit with no
serviceable parts.
Don't accidentally short circuit the battery by carrying it in your pocket
or purse with other metallic objects such as coins, clips and pens. This
may critically damage the battery.
Don't leave the battery in extremely hot or cold temperatures.
Otherwise, it could significantly reduce the capacity and lifetime of the
battery.
Don't dispose of the battery by placing into a fire

Advertisement

Table of Contents
loading

Table of Contents