Pivot Verizon TXT8030 User Manual page 55

1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], select
then swivel to the QWERTY keypad and press
7. Security.
2. Enter the four-digit lock code, then press the OK Key [OK]. The
default lock code is the last 4 digits of your mobile number.
3. Press 4. Lock Phone Now.
4. To unlock the phone, in standby mode, press the Right Soft Key
[Unlock] and enter the four-digit lock code, then press the OK Key
[OK].
RESTORE PHONE
To delete all User Data and restore all settings to their initial defaults:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], select
then swivel to the QWERTY keypad and press
7. Security.
2. Enter the four-digit lock code, then press the OK Key [OK].
3. Press 5. Restore Phone.
4. A confirmation message appears in the display, press the
Directional Key up or down to select Yes, and then press the OK
Key [OK].
5. After reading the message that appears, press the OK Key [OK].
6. Enter the four-digit lock code, then press the OK Key [OK]. The
phone will turn off and then back on again automatically.
SYSTEM SELECT
You can set your phone to search or roam on another network when you
SETTINGS & TOOLS,
are not in your home area. Leave this setting as default unless you want to
6. Phone Settings,
alter the system selection as instructed by your service provider.
SETTINGS & TOOLS,
6. Phone Settings,
NAM SELECTION
Enables Auto NAM (Number Assignment Modules) or manually selects a
NAM.
AUTO NAM
Automatically switches the phone to proper NAM when you have multiple
NAM registrations.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], select
then swivel to the QWERTY keypad and press
8. System Select.
2. Press the Directional Key up or down to select one of the following
settings, then press the OK Key [SET].
Automatic B: Scan radio channels based on the Automatic B
setting.
Automatic A: Scan radio channels based on the Automatic A
setting.
Home Only: Only within your home area or home affiliated
area.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], select
SETTINGS & TOOLS,
6. Phone Settings,
SETTINGS & TOOLS,
55