Pivot Verizon TXT8030 User Manual page 54

Calls & Services: Allows you to edit the lock code for
Restrictions. (The default lock code is the last 4 digits of your
mobile number.)
5. If Phone Only is selected, enter the new four-digit code in the
Enter New Code field. Enter the new four-digit code again in the
Re-enter New Code field to confirm your input.
6. If Calls & Services is selected, enter the current lock code in the
Enter Current Code
Enter New Code field. Enter the new four-digit code again in the
Re-enter New Code field.
7. Press the OK Key [SET].
RESTRICTIONS
Use the following procedure to configure Location Setting, Calls and
Messages restrictions.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], select
then swivel to the QWERTY keypad and press
7. Security.
2. Enter the four-digit lock code, then press the OK Key [OK]. The
default lock code is the last 4 digits of your mobile number.
3. Press 2. Restrictions.
4. Enter the four-digit lock code again, then press the OK Key [OK].
5. Select one of the following settings:
Location Setting: Unlock Setting/Lock Setting.
Calls: Incoming Calls/Outgoing Calls.
54
field. Enter the new four-digit code in the
SETTINGS &
6. Phone
For Incoming Calls, set
For Outgoing Calls, set
Messages:
For Incoming Messages, set
For Outgoing Messages, set
PHONE LOCK SETTING
This setting specifies whether the phone should be locked whenever it is
turned on. Lock Mode prevents the unauthorized use of your phone. Once
the phone is locked, it is in restricted mode until the lock code is entered.
You can still make emergency calls. You can modify the lock code using the
new lock code within the
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], select
then swivel to the QWERTY keypad and press
7. Security.
TOOLS, 2. Enter the four-digit lock code, then press the OK Key [OK]. The
Settings, default lock code is the last 4 digits of your mobile number.
3. Press 3. Phone Lock
4. Press the Directional Key up or down to select one of the following
settings, then press the OK Key [OK].
Unlocked: Phone is unlocked.
On Power
LOCK PHONE NOW
Lock the phone now.
Allow All/Contacts Only/Block
Allow All/Contacts Only/Block
Incoming Messages/Outgoing Messages.
Allow All/Block
Allow All/Block
Security menu.
SETTINGS &
6. Phone
Setting.
Up: Phone will lock when it is turned on.
All.
All.
All.
All.
TOOLS,
Settings,