Pivot Verizon TXT8030 User Manual page 27

4. Then swivel to the QWERTY keypad, and then select
then press the OK Key [OK].
5. Press the Directional Key up or down to select a Speed Dial location,
then press the OK Key [SET].
6. Press the Directional Key up or down to select "Yes" to save, then press
the OK Key [OK].
7. Press the OK Key [SAVE] to save.
EDITING CONTACTS ENTRIES
ADDING A PHONE NUMBER FROM THE STANDBY MODE
1. From standby mode, swivel to the QWERTY keypad and then enter the
phone number you want to save (up to 48 digits).
2. Press the Left Soft Key [Save].
3. Press the Directional Key up or down to highlight
press the OK Key [OK].
4. Press the Directional Key up or down to highlight the existing Contact
entry, then press the OK Key [OK].
5. Press the Directional Key up or down to highlight the following phone
number type, then press the OK Key [OK].
Mobile 1 / Mobile 2 / Home
6. If a phone number is already assigned to the item you selected, press
the Directional Key up or down to select
Key [OK]. If nothing is currently assigned to the phone number item,
press the OK Key [SAVE].
7. "CONTACT SAVED" displays, then the phone number reappears on the
screen. Press the End Key to exit, or press the Send Key to call the
1. Set Speed
Update Existing, then
/ Work / Fax
Yes or No, then press the OK
Dial, number.
ADDING A PHONE NUMBER FROM THE CONTACT LIST SCREEN
1. From standby mode, press the OK Key [OK] to unlock the keypad, then
press the Right Soft Key [Contacts]. Your Contacts are displayed
alphabetically.
2. Press the Directional Key up or down to highlight the Contact entry you
want to edit, then press the Left Soft Key [Edit].
3. Press the Directional Key up or down to highlight the phone number
field you want to add, then swivel to the QWERTY keypad, and then
enter the number, then press the OK Key [SAVE] to save. A
confirmation message appears.
DEFAULT NUMBERS
The phone number saved when a Contact is created is the Default Number.
If more than one number is saved in a Contact entry, another number can
be set as the Default Number.
Note:
The Default Number cannot be deleted. The entire Contact entry can be
deleted or another number can be assigned as the Default Number
allowing you to delete the original number and keep the Contact entry.
CHANGING THE DEFAULT NUMBER
1. From standby mode, press the OK Key [OK] to unlock the keypad, then
press the Right Soft Key [Contacts]. Your Contacts are displayed
alphabetically.
27