Panasonic KX-TEA308 User Manual page 148

4.1 Troubleshooting
Problem
I want to confirm my extension number.
The date and/or time are not correct.
The display is dim.
The MESSAGE/Message button light or
Message/Ringer Lamp is lit.
"Voice Msg Full" is displayed.
A power failure has occurred.
148 User Manual
• Confirm your extension number by pressing the
" " key 2 times while on-hook, or through personal
programming.
( Your Extension Number in 1.1.1 Before
Operating a Telephone, 3.1.2 Changing Personal
Settings Using Programming Mode)
• Ask your operator or manager to change the date
or time. ( Date & Time Set in 2.1.7 Changing
System Settings Using Programming Mode)
• Change the display contrast level.
( 1.1.1 Before Operating a Telephone)
• There are 3 possible reasons:
(1) Someone has left a message waiting indication
for you,
(2) Someone has left a Built-in Voice Message (BV)
for you, or
(3) Someone has left a Voice Mail message for you.
Press the MESSAGE/Message button to call the
party back or receive the message.
• The maximum voice message recording time has
been reached.
Delete voice messages stored in your personal
message area or in the common message area.
It may take about 10 seconds for the display to
return to the idle status display even if the remaining
recording time becomes 5 minutes or more.
( 1.5.5 Using Voice Messaging (Built-in Voice
Message [BV]))
• When a power failure occurs...
All functions of the PBX and Panasonic PTs stop.
Outside (CO) line 1 is automatically connected to
extension jack 01.
This allows outside (CO) line conversations between
the connected single line telephone (SLT) and outside
destination.
• When the power is turned back on...
Your PBX restarts with the stored data automatically.
Memory is protected by a factory-provided lithium
battery. There is no memory loss except for the data
associated with Automatic Callback Busy, Redial, and
Call Park.
Remedy