Installing And Replacing The Batteries In The Handset; Battery Life And Range - Philips DECT 122 User Manual

Installing and replacing the batteries in the handset

To insert the batteries, open the battery cover, place the batteries as indicated and then replace
the battery cover.When the battery icon is blinking, charge is needed. Allow 12 - 15 hours for
the batteries to fully charge. On first use it may be necessary to wait for a few minutes before
seeing symbols on the display.
Never use any battery type other than the one supplied : risk of explosion.
Warning : the base station must always be plugged into the mains when charging or when in use.
Always use rechargeable batteries.
The warranty does not apply to the batteries and any other components which have a limited
lifetime or are exposed to wear.
Batteries should not be disposed of with general household waste.

Battery life and range

Optimal battery life is reached after 3 cycles of complete charging & discharging.When reaching
the range limit and the conversation becomes crackly, move closer to the base.To reach optimal
range, place the base station away from electrical appliances.
Battery life in Battery life in standby Indoor range Outdoor range
talk time mode
up to 10 hours up to 120 hours up to 50 metres up to 300 metres
8
Installing the DECT 122