Telephonig; Entering Additional Sharacters; Changing The Display Language - Philips SmartLine D750 User Manual

Philips telephone user's guide d750
Table of Contents

Advertisement

10
Telephone operation:
1.3.2
Telephoning
Initiating a call: a specified MSN identifies the call
When calling, you can now specify which multiple subscriber num-
ber (MSN) that will be the transferred to the called party as identifi-
cation. In order to do this the corresponding function must be assig-
ned to a name key; on pressing the name key the desired MSN is
entered. This specific MSN will then be transferred to the called
party when making the next call; having made this call, the setting
will be reset to the default value.
or
(for the assigment of the function to the name key, see below)
enter the MSN
Prerequisites for the application:
• The MSN's of your ISDN-connection must have been completely speci-
fied in the setup menu by the menu item „
• The name key must have been properly programmed (:applied as func-
tion key). Accordingly you perform the following steps (section 4 of the
Operating Instructions):
-
Select name key:
Select the function with the desired multiple subscriber number.
Store input
1 Start up
Press the name key with the function
"
-
-
Confirm selection
or
(display of a multiple subscriber number)
".
Changeover
language
Telephone operation:
1 Start up
Number redialling with lifted handset
The subscriber number is now selected by the cursor and OK keys.
-
Press the redial key
Select the number to be redialled; pressing the redial key again.
Confirm your selection
1.3.3
Entering additional characters
Entering the DTMF characters „asterisk"
Applies for keypad functions as well as for the programming of name keys
and telephone directory: additionally, DTMF-sequences can be entered,
applying also the „asterisk" and „square" buttons.
1.4

Changing the display language

2 language variants are available for the display texts: The standard setting
is = German. You can change over to the other language:
-
-
Input PIN -
change over to the other language -
Please notice: Changing to english language causes that the national prefix
will be erased due to requirements in several countries (please refer to
chapter 5.4).
11
and „square"
store setting

Advertisement

Table of Contents
loading

Table of Contents